Three-Phase Voltage Measurement with Potential Transformers and a Microcontroller
Measure three-phase mains voltage with PTs and a microcontroller: scaling a 220:12 V PT for a 3.3 V ADC, line-to-line RMS, phase failure and phase sequence detection.
Measure three-phase mains voltage with PTs and a microcontroller: scaling a 220:12 V PT for a 3.3 V ADC, line-to-line RMS, phase failure and phase sequence detection.
Knowing your battery’s state of health isn’t just about checking voltage and capacity — Battery Internal Impedance (or internal resistance) is one of the best indicators of how healthy (or worn out) a battery is. If you’re serious about battery packs, DIY solar, UPS, electric vehicles, or just extending your Read more
In this chapter, we’ll focus on Learning ADC of PIC microcontrollers. ADC or Analog to Digital Converter is one of the most fundamental features of a microcontroller. And whenever we work with microcontrollers, we need this feature almost all the time. So we have to learn it which is a Read more
We all know about voltmeters. Besides multimeters, there are some panel meters that show voltage, current, etc. Making such an AC voltmeter is sometimes becomes very helpful. Here in this article, we are going to learn how we can make our own single-phase AC voltmeter using a PIC16F76 micro-controller and Read more
Design an automatic voltage stabilizer with a PIC microcontroller from A to Z: relay tap switching, mains sensing, circuit diagram, code, simulation and PCB.
In this article, we are going to learn how to make a high voltage AC voltmeter using Arduino and we are going to measure 2500V. Utilizing the technique shown here, we can even measure more than this range. So let’s start our High Voltage AC voltmeter. ⏱ 5 min read Read more
In this article, we are going to measure high voltage using Arduino. Measuring over 1500V is not safe to work at all. But sometimes, we need to implement such a meter. Here in this article, we will make a high voltage DC voltmeter with Arduino UNO that can measure over Read more
In this article, we will learn to make an AC voltmeter using Arduino UNO and 4×1 seven-segment display. If you learn this project clearly, you’ll be able to measure any AC voltage of your home. I hope you’ll make your own AC voltmeter using Arduino now. ⏱ 6 min read Read more
A DC voltmeter is very common in electronics and needs to use in many systems as well. In this article, we are going to learn how to make a DC voltmeter with Arduino and Seven Segment display. If you learn this carefully, you’ll be able to make a voltmeter of Read more
Like the high voltage AC meter, we can use the same Op-Amp circuit to measure high voltage DC voltmeter. In this article, we are going to learn how to make a high voltage DC voltmeter using a micro-controller and Op-Amp circuitry. ⏱ 3 min read · 🔧 Includes: diagrams & Read more