## How to implement a maximum power point tracking (MPPT) algorithm with an Arduino

“Learn how to implement a maximum power point tracking (MPPT) algorithm with an Arduino to optimize solar panel performance. Our tutorial provides sample code and insights into how MPPT works, helping you maximize energy output from your solar panel system.” What is MPPT? An MPPT, or maximum power point tracker Read more…

## Energy-saving innovative power switch for microcontroller circuit

When you are working with battery depending low power-consuming circuits, then you may need this innovative power switch. The concept is to save energy while the device is not operating but the battery is connected. Why we need to save energy: We use electricity almost all the time. In some Read more…

## Buck converter using NE555 and N-Channel MOSFET

Sometimes making a high amp regulator become very complex using linear regulator ICs. But using a buck converter can be very easy if the circuit work is simplified. Especially for motor-type loads. In this article, we will make a simple motor regulator using buck converter utilizing N-Channel MOSFET and NE555 Read more…

## BUCK converter using low side N-Channel MOSFET

When it comes to mind to use a DC/DC converter the first converter that comes to mind is the BUCK converter. There are lots of designs online as well as dedicated ICs for this purpose. But most of these are high side P-MOS based. In high-side P-MOS-based circuits, the gate Read more…

## Transformerless power supply design guide in detail with calculator

From hobbyists to professionals transformerless power supply is one of the common power supply design everyone wants to do. This type of power supply has both advantages and disadvantages. In this article, I’ll discuss in detail this subject and will see several methods with calculations. So let’s start our “Transformerless Read more…

## Arduino based egg incubator

In this article, we are going to make Arduino based egg incubator. With an Arduino UNO and other associative devices. To make an incubator, we need to maintain an optimum temperature and humidity with other parameters like CO2. As this is a learning project, so we’ll focus on basic incubator Read more…