Many people in Bangladesh ask whether they need an IPS, a voltage stabilizer or a UPS. They solve different problems. This guide explains the difference so you buy the right one, or the right combination.

In this article
  • What each device does
  • Quick comparison table
  • Which one should you buy?
  • Can you use them together?

What each device does

  • Voltage stabilizer: keeps the mains voltage close to 220–230 V when the supply is too low or too high. It does nothing when the power goes off.
  • IPS / inverter: keeps your fans and lights running during load-shedding using a battery. Most IPS units switch over within about 10–20 milliseconds.
  • UPS: similar to an IPS but built for computers: very fast or no switchover, smaller battery, short backup (minutes) so you can save work and shut down.

Quick comparison

Voltage stabilizerIPSUPS
Fixes low/high voltageYesPartly (some models)Yes (line-interactive/online)
Works during power cutNoYesYes
Typical backup–2–6 hours5–20 minutes
Best forAC, fridge, motors on weak linesFans, lights, TV, routerDesktop PC, server, CCTV recorder
BatteryNoneLarge (100–200 Ah)Small (7–9 Ah typical)

Which one should you buy?

  • Voltage drops in the evening but power rarely goes off: a stabilizer for the AC and fridge.
  • Frequent load-shedding: an IPS sized with our IPS calculator.
  • You work on a desktop PC: a UPS for the PC, even if you have an IPS.

Can you use them together?

Yes. A common setup is a stabilizer on the AC and fridge, an IPS for fans and lights, and a small UPS for the computer. Do not plug a refrigerator or AC into a small IPS, and do not put a UPS on the output of a square wave IPS.

How a stabilizer works inside

Most home stabilizers use a tapped transformer and relays that switch taps as the input voltage changes. We have step-by-step designs for both an analog relay stabilizer with LM324 and NE555 and a microcontroller-based stabilizer.

Need a stabilizer, IPS or protection board designed? Message us on WhatsApp or use the contact form. You can write in Bangla or English.


MKDas

Mithun K. Das. B.Sc. in Electrical and Electronic Engineering (EEE) from KUET. Senior Embedded Systems Designer at a leading international company. Welcome to my personal blog! I share articles on various electronics topics, breaking them down into simple and easy-to-understand explanations, especially for beginners. My goal is to make learning electronics accessible and enjoyable for everyone. If you have any questions or need further assistance, feel free to reach out through the Contact Us page. Thank you for visiting, and happy learning!

0 Comments

Leave a Reply

Avatar placeholder

Your email address will not be published. Required fields are marked *