Load-shedding is part of life in many parts of Bangladesh, and an IPS (instant power supply) is the most common way to keep fans, lights and the Wi-Fi router running. Buying the wrong size, however, means short backup, a battery that dies early, or an inverter that trips when the fan starts. This guide explains how to choose an IPS that fits your home, in plain language.

In this article
  • How an IPS works
  • Step 1: add up your loads
  • Step 2: choose the IPS rating (VA)
  • Step 3: choose the battery
  • Sine wave or square wave?
  • Installation and safety tips
  • FAQ

How an IPS works

Grid (DESCO,DPDC, PBS…)Changeover relayBattery chargerInverter (DC → AC)IPSFans, lights,TV, routerBattery 12/24 V
With grid power on, the IPS passes mains to your loads and charges the battery. During load-shedding the changeover relay switches the loads to the inverter, which runs from the battery.

Step 1: add up your loads

List only what you really need during load-shedding. Typical power ratings:

ApplianceTypical powerNotes
Ceiling fan (regular)60–80 WThe biggest load in most homes
Ceiling fan (BLDC)28–35 WHalves fan consumption
LED bulb5–15 W
LED tube light18–22 W
LED TV 32–43 inch40–80 W
Wi-Fi router + ONU10–20 WSmall but always on
Laptop charging45–90 W
Refrigerator100–200 W runningHigh starting current; needs a large IPS

Example: 3 fans (75 W) + 6 LED bulbs (10 W) + 1 TV (60 W) + router (15 W) = 360 W.

Step 2: choose the IPS rating (VA)

IPS units are sold in VA, not watts. Home loads have a power factor below 1, and motors (fans, pumps) draw extra current when they start, so size with margin:

IPS VA ≈ total watts ÷ 0.7 × 1.25

For 360 W that is about 640 VA, so a 650–800 VA IPS is the right choice. Our IPS size calculator does this for you.

Step 3: choose the battery

Backup time depends on the battery, not the IPS. Use:

Battery Ah ≈ watts × hours ÷ (battery voltage × 0.85 × usable fraction)

Battery typeUsable capacityLifeNotes
Tubular lead-acidabout 50%4–6 years with careMost common; needs distilled water top-up
Sealed (SMF/VRLA)about 50%2–4 yearsNo maintenance, shorter life in heat
LiFePO4 lithiumabout 80–90%8–10+ yearsHigher price, much lighter, needs a compatible charger

Example: 360 W for 3 hours on a 24 V system with tubular batteries needs about 360 × 3 ÷ (24 × 0.85 × 0.5) ≈ 106 Ah, so two 12 V 100–120 Ah batteries in series. Check different options with the battery backup time calculator.

Sine wave or square wave?

  • Pure sine wave IPS units give clean power: fans run quietly and cool, and electronics such as TVs, routers and laptop chargers are safe.
  • Modified/square wave units are cheaper but make fans hum and run warmer, and some chargers and LED drivers fail early.
  • For a new purchase, a pure sine wave IPS is worth the small extra cost.

Curious what is inside a sine wave inverter? See our PIC16F76 pure sine wave inverter tutorial.

Installation and safety tips

  • Keep the battery in a ventilated place; lead-acid batteries release hydrogen while charging.
  • Use thick enough battery cables and tight lugs; loose connections cause heat and voltage drop.
  • Have the changeover wiring done by an electrician so the IPS output never feeds back into the grid.
  • Do not connect irons, heaters, rice cookers or water pumps to a small IPS.
  • Check tubular battery water level every 1–2 months.

FAQ

Can an IPS run my refrigerator?

Only a large, pure sine wave IPS (usually 1,500 VA or more) with a big battery. The compressor start current is several times its running power.

Why does my backup time fall every year?

Lead-acid batteries lose capacity with age, deep discharge and heat. Keep them topped up and avoid draining them completely.

Need an IPS, inverter or charger designed for your product or factory? Message us on WhatsApp or use the contact form. You can write in Bangla or English.


MKDas

Mithun K. Das. B.Sc. in Electrical and Electronic Engineering (EEE) from KUET. Senior Embedded Systems Designer at a leading international company. Welcome to my personal blog! I share articles on various electronics topics, breaking them down into simple and easy-to-understand explanations, especially for beginners. My goal is to make learning electronics accessible and enjoyable for everyone. If you have any questions or need further assistance, feel free to reach out through the Contact Us page. Thank you for visiting, and happy learning!

0 Comments

Leave a Reply

Avatar placeholder

Your email address will not be published. Required fields are marked *