Community water points sell safe drinking water by the litre. To run them without a full-time attendant, the operator needs a machine that takes payment, dispenses an exact volume and keeps records. We designed the controller for such a water ATM. Four units are running in the field today, serving more than 1,000 registered users and dispensing around 5,000 litres a day.

In this article
  • What the water ATM does
  • Hardware: ATmega16, RFID, coin acceptor and flow sensor
  • How a customer buys water
  • Recharge, logging and the IoT server
  • Results in the field
Prepaid water ATM controller with RFID reader, keypad, LCD and coin acceptor

What the water ATM does

  • Customers pay with a prepaid RFID card or with coins/tokens
  • A flow sensor measures the water dispensed, so customers pay for actual litres
  • Card balances are recharged locally in BDT at the water point
  • Every sale is logged locally and sent over GSM to an IoT server

Hardware

BlockDetails
MicrocontrollerATmega16
PaymentRFID card reader and coin/token acceptor
MeteringFlow sensor (pulse output) controlling the dispensing valve
User interfaceCharacter LCD and keypad
DataLocal transaction log plus GSM link to an IoT server
EnclosureWall-mounted steel enclosure

How a customer buys water

  • Tap the RFID card (or insert coins) to start
  • The display shows the balance and the volume available
  • The valve opens and the flow sensor counts the litres dispensed
  • Dispensing stops at the selected volume or when the balance runs out
  • The new balance is shown, and the sale is logged
Water ATM controller installed at a community water point

Recharge, logging and the IoT server

The operator recharges customer cards in BDT at the water point. Each transaction is stored locally, so no data is lost when the mobile network is down, and is then uploaded over GSM to an IoT server. From there the operator can see sales, volume and machine status for every water point without visiting it.

Results in the field

MetricValue
Units running4
Registered users1,000+
Water dispensedAbout 5,000 litres per day

The same platform can be adapted to other pay-per-use products: fuel or oil dispensing, laundry, charging stations or any metered service.

Planning a vending, metering or remote-monitoring product? We design the controller, firmware and IoT link, and support field deployment. Message us on WhatsApp or use the contact form.


MKDas

Mithun K. Das. B.Sc. in Electrical and Electronic Engineering (EEE) from KUET. Senior Embedded Systems Designer at a leading international company. Welcome to my personal blog! I share articles on various electronics topics, breaking them down into simple and easy-to-understand explanations, especially for beginners. My goal is to make learning electronics accessible and enjoyable for everyone. If you have any questions or need further assistance, feel free to reach out through the Contact Us page. Thank you for visiting, and happy learning!

0 Comments

Leave a Reply

Avatar placeholder

Your email address will not be published. Required fields are marked *