Estimate how long a battery bank can run a load through an inverter, IPS or UPS. Works for lead-acid and lithium (LiFePO4) batteries.

Formula

Backup time (h) = Ah × V × number of batteries × usable fraction × efficiency / load (W)

Design notes

  • Lead-acid capacity drops at high discharge rates (Peukert effect). Rated Ah is usually at the 20-hour rate, so heavy loads give less runtime than this estimate.
  • Discharging lead-acid batteries below 50% regularly shortens their life considerably.
  • Battery capacity falls with age and at low temperature; size with 20–30% margin.
  • Inverter idle consumption also drains the battery when the load is small.

More calculators

Need this designed for your product? We design power electronics, embedded firmware and industrial IoT hardware. Message us on WhatsApp or use the contact form.