Enter the code printed on a ceramic or film capacitor to get its value in pF, nF and µF, plus the tolerance letter.
Reading capacitor codes
Small ceramic and film capacitors use a 3-digit code in picofarads: the first two digits are the value and the third is the number of zeros. 104 = 10 × 10⁴ pF = 100,000 pF = 100 nF = 0.1 µF, the most common decoupling capacitor. 103 = 10 nF, 222 = 2.2 nF, and two-digit codes such as 22 mean 22 pF.
A letter after the code is the tolerance: J = ±5%, K = ±10%, M = ±20%. The voltage rating is printed separately (for example 50V or 2A = 100 V on some film caps).
Working out an RC delay or filter? Use the RC time constant calculator.
More calculators
- PCB Trace Width Calculator (IPC-2221)
- Voltage Divider and ADC Scaling Calculator
- LED Series Resistor Calculator
- Battery Backup Time Calculator for Inverters and UPS
- CT Burden Resistor Calculator for Microcontroller ADC
- Ohm’s Law and Power Calculator
- Resistor Colour Code Calculator (4 and 5 Band)
- 555 Timer Astable Calculator
- RC Time Constant and Cut-off Frequency Calculator
- IPS / Inverter Size and Battery Calculator for Home
- Electricity Unit (kWh) and Bill Calculator
- Solar Home System Size Calculator (Panels, Battery, Controller)
- SMD Resistor Code Calculator (3-Digit, 4-Digit and EIA-96)
- Series and Parallel Resistor and Capacitor Calculator
- Wire Size and Voltage Drop Calculator (mm² Cable)
- LM317 Voltage Regulator Calculator (R1, R2 and Output Voltage)
- Buck Converter Calculator (Duty Cycle, Inductor and Capacitor)
- Battery Charging Time Calculator (Lead-Acid, Li-ion, LiFePO4)
- Li-ion / LiFePO4 Battery Pack Calculator (Series and Parallel Cells)
- Op-Amp Gain Calculator (Inverting and Non-Inverting)
- kVA, kW and Amps Calculator (Single-Phase and Three-Phase)
Need this designed for your product? We design power electronics, embedded firmware and industrial IoT hardware. Message us on WhatsApp or use the contact form.