Convert between kW, kVA and current for single-phase and three-phase supplies. Handy for sizing generators, IPS, breakers and cables.
kW vs kVA
kW is real power that does work; kVA is apparent power that the generator, IPS or transformer must supply. They are linked by the power factor: kVA = kW ÷ PF. Motors, fans and compressors have a PF around 0.7–0.85; resistive loads (heaters, irons) are close to 1.
- Single-phase current: I = kVA × 1000 ÷ V
- Three-phase current: I = kVA × 1000 ÷ (√3 × V line-to-line)
Then size the cable with the wire size and voltage drop calculator, or check your bill with the electricity unit calculator.
More calculators
- PCB Trace Width Calculator (IPC-2221)
- Voltage Divider and ADC Scaling Calculator
- LED Series Resistor Calculator
- Battery Backup Time Calculator for Inverters and UPS
- CT Burden Resistor Calculator for Microcontroller ADC
- Ohm’s Law and Power Calculator
- Resistor Colour Code Calculator (4 and 5 Band)
- 555 Timer Astable Calculator
- RC Time Constant and Cut-off Frequency Calculator
- IPS / Inverter Size and Battery Calculator for Home
- Electricity Unit (kWh) and Bill Calculator
- Solar Home System Size Calculator (Panels, Battery, Controller)
- SMD Resistor Code Calculator (3-Digit, 4-Digit and EIA-96)
- Capacitor Code Calculator (104, 103, 222 to nF and µF)
- Series and Parallel Resistor and Capacitor Calculator
- Wire Size and Voltage Drop Calculator (mm² Cable)
- LM317 Voltage Regulator Calculator (R1, R2 and Output Voltage)
- Buck Converter Calculator (Duty Cycle, Inductor and Capacitor)
- Battery Charging Time Calculator (Lead-Acid, Li-ion, LiFePO4)
- Li-ion / LiFePO4 Battery Pack Calculator (Series and Parallel Cells)
- Op-Amp Gain Calculator (Inverting and Non-Inverting)
Need this designed for your product? We design power electronics, embedded firmware and industrial IoT hardware. Message us on WhatsApp or use the contact form.