Enter your buck converter specs to get duty cycle, inductor value, peak switch current and output capacitance for your ripple target.

Formulas used (ideal, continuous mode)

  • D = Vout / Vin (real converters need slightly more because of losses).
  • L = (Vin − Vout) × D / (fsw × ΔI), with ΔI chosen as 20–40% of output current.
  • Ipeak = Iout + ΔI/2: pick an inductor whose saturation current is comfortably above this.
  • Cout ≈ ΔI / (8 × fsw × ΔV) for the capacitive part of the ripple; ESR adds ΔI × ESR on top.

Building one? Read our buck converter with a low-side MOSFET and the MPPT synchronous buck guide.

More calculators

Need this designed for your product? We design power electronics, embedded firmware and industrial IoT hardware. Message us on WhatsApp or use the contact form.