Find the cable cross-section (mm²) that keeps voltage drop within your limit, and see the drop for each standard size. Useful for house wiring, solar, IPS and battery cables.
How the calculation works
Voltage drop = k × ρ × L × I ÷ A, where ρ is resistivity (copper ≈ 0.0175 Ω·mm²/m, aluminium ≈ 0.0282), L is the one-way length, I the current and A the cross-section in mm². k = 2 for DC and single-phase (out and back) and √3 for balanced three-phase.
Typical limits
- 3% for lighting and sensitive loads, 5% total for general circuits is a common guideline.
- Low-voltage DC (12 V / 24 V solar and IPS battery cables) suffers most: a 0.5 V drop is 4% of 12 V. Keep battery cables short and thick.
Sizing a solar or IPS system? Pair this with the solar system size and IPS size calculators.
More calculators
- PCB Trace Width Calculator (IPC-2221)
- Voltage Divider and ADC Scaling Calculator
- LED Series Resistor Calculator
- Battery Backup Time Calculator for Inverters and UPS
- CT Burden Resistor Calculator for Microcontroller ADC
- Ohm’s Law and Power Calculator
- Resistor Colour Code Calculator (4 and 5 Band)
- 555 Timer Astable Calculator
- RC Time Constant and Cut-off Frequency Calculator
- IPS / Inverter Size and Battery Calculator for Home
- Electricity Unit (kWh) and Bill Calculator
- Solar Home System Size Calculator (Panels, Battery, Controller)
- SMD Resistor Code Calculator (3-Digit, 4-Digit and EIA-96)
- Capacitor Code Calculator (104, 103, 222 to nF and µF)
- Series and Parallel Resistor and Capacitor Calculator
- LM317 Voltage Regulator Calculator (R1, R2 and Output Voltage)
- Buck Converter Calculator (Duty Cycle, Inductor and Capacitor)
- Battery Charging Time Calculator (Lead-Acid, Li-ion, LiFePO4)
- Li-ion / LiFePO4 Battery Pack Calculator (Series and Parallel Cells)
- Op-Amp Gain Calculator (Inverting and Non-Inverting)
- kVA, kW and Amps Calculator (Single-Phase and Three-Phase)
Need this designed for your product? We design power electronics, embedded firmware and industrial IoT hardware. Message us on WhatsApp or use the contact form.