When a control board inside an imported machine fails, the whole machine stops. For this industrial dehumidifier the relay card was expensive, hard to import, and there was only one original sample in Bangladesh. We rebuilt it as a drop-in replacement, and the new board went on to be supplied in many units.

Year 2018
Client type Industrial equipment users and service companies
Our role Reverse engineering, PCB design, assembly, testing
Board type Mains-powered relay and fuse control card
Outcome Drop-in replacement, supplied in many units
Industrial dehumidifier relay control card with power relays, fuses and transformer
The original relay card: mains transformer, power relays, fused outputs and FAULT/RUN signal terminals.

The problem

The original card is a mains-side control board. It carries a transformer with 110/220 V selection, several power relays that switch the machine’s loads, fused outputs, and FAULT and RUN signal terminals for the main controller. A single failed card meant a stopped dehumidifier, and a replacement had to be ordered from abroad at a high price, with a long wait.

Advertisements

How we rebuilt it

We worked from the one original sample, without schematics or manufacturer data:

  1. Trace the circuit from the original board and redraw the full schematic.
  2. Choose parts with the same or better ratings for relays, fuses, transformer and connectors, sourced so that the board can be built locally.
  3. Lay out a new PCB with the same outline, mounting holes and connector positions, so it drops into the machine with no rewiring.
  4. Keep mains safety in mind: creepage and clearance between the mains and low-voltage sides, and fuse ratings matched to each output.
  5. Test in the machine before releasing the design for production.
New replacement PCB for the dehumidifier relay card before assembly
Our new bare PCB with the same footprint, mounting holes and connector positions as the original.

Result

The rebuilt card works as a direct replacement for the original. Instead of waiting weeks for an expensive import, owners and service teams could get a locally made board, and we went on to supply the replacement in many units.

Many factories have the same problem: a good machine sitting idle because of one obsolete or unobtainable board. Rebuilding or redesigning that board is often far cheaper than replacing the machine. If you are diagnosing a failed board yourself, start with our guide on how to troubleshoot a dead circuit board.

🛠️ Have an obsolete or hard-to-find control board?

We take projects from idea to production: circuit and PCB design, firmware, prototypes, enclosure integration and small-batch manufacturing. NDA available on request, and you own the design files.

💬 Discuss your project on WhatsApp   or send the details through our contact form →


MKDas

Mithun K. Das. B.Sc. in Electrical and Electronic Engineering (EEE) from KUET. Senior Embedded Systems Designer at a leading international company. Welcome to my personal blog! I share articles on various electronics topics, breaking them down into simple and easy-to-understand explanations, especially for beginners. My goal is to make learning electronics accessible and enjoyable for everyone. If you have any questions or need further assistance, feel free to reach out through the Contact Us page. Thank you for visiting, and happy learning!

0 Comments

Leave a Reply

Avatar placeholder

Your email address will not be published. Required fields are marked *