Teaching young children to wash their hands properly is easier with music than with rules. This smart hand wash system guides each child with a song and visual steps, controls the soap dispenser, and logs every wash so the programme can see whether the habit is sticking. It is installed in more than 100 primary schools.

Year 2020
Client type School hygiene programme of an international development agency
Deployment 100+ primary schools
Our role Controller design, PCB, firmware, production
Controller ATmega2560
Logging SD card, per student
Smart hand wash system controller PCB with GSM module, SD card and keypad connectors
The hand-wash controller board with connectors for keypad, speaker, sensor, LED message board and the GSM module.

The goal

The programme wanted children to build a lasting hand-washing habit, and wanted proof that the stations were actually used. Each station therefore had to do three things: teach (make washing fun and show the steps), dispense soap reliably, and measure usage per student.

How it works

  • Each child is identified by a student ID, entered on the keypad.
  • The station plays a hand-washing song, and the LED moving message board shows each step, so the child washes for the full time.
  • The controller runs the soap dispenser and monitors it.
  • Every session is written to the SD card.

What the data logger records

  • student ID and wash count
  • soap status
  • false counts
  • over-use events

With this data the programme team can compare schools, spot stations that need soap or service, and see whether washing habits improve over time.

Close-up of the smart hand wash controller with ATmega2560 and connectors
Close-up of the controller: ATmega2560 MCU, SD card slot, GSM module, buzzer and connectors for keypad, speaker and sensor.

Built for schools

A school station gets heavy, unsupervised use by small children, so the design favours simple interaction (keypad, music, lights), robust connectors and local logging that works without a network. The board also carries a GSM module for remote connectivity. One controller design was produced in volume and installed in more than 100 schools.

🛠️ Need a connected device for a programme or a public service?

We take projects from idea to production: circuit and PCB design, firmware, prototypes, enclosure integration and small-batch manufacturing. NDA available on request, and you own the design files.

💬 Discuss your project on WhatsApp   or send the details through our contact form →


MKDas

Mithun K. Das. B.Sc. in Electrical and Electronic Engineering (EEE) from KUET. Senior Embedded Systems Designer at a leading international company. Welcome to my personal blog! I share articles on various electronics topics, breaking them down into simple and easy-to-understand explanations, especially for beginners. My goal is to make learning electronics accessible and enjoyable for everyone. If you have any questions or need further assistance, feel free to reach out through the Contact Us page. Thank you for visiting, and happy learning!

0 Comments

Leave a Reply

Avatar placeholder

Your email address will not be published. Required fields are marked *